NAUTICGRIP IF INFUSION MOLDING ADHESIVE
NauticGrip IF Infusion Molding Adhesive is specifically designed to hold reinforcing fibers in place during the infusion process of the resin without affecting surface finish or structural integrity. NautifGrip IF is designed to hold mats, pads and similar types of dry materials to themselves or onto mold surfaces during resin infusion. Most importantly, NG IF will not interfere with the curing process of vinyl esters, polyesters or styrene resins. In fact, the adhesive is designed t ultimately become part of the polymer matrix.
NG IF is a unique system to be used in the molding process, and is designed specifically to overcome the problems normally associated with using other types of adhesives, such as bonding failure, resin blockage, surface defects in the finished product, etc. The unique ‘self contained’ delivery system makes it simple and convenient for operators to apply.
NG IF is designed to give a provisional hold for fiberglass materials in place prior to the application of fiberglass resin and/or gel coat to build up composites. It can also be used as a general purpose adhesive for a wide range of applications.
• Green tint for easy visibility
|NorthStar Chemicals, Inc • 19 Smiley Ingram Road • Cartersville, GA • 770-386-6961 (Phone) • 770-386-0615 (Fax)|