| Graffiti Off |
Adhesive Cleaner Remover |
GRAFFITI OFF is a product strong enough to remove
most types of graffiti yet safe to use on stone, concrete, brick,
metals,laminated counter tops, vinyl siding, solid vinyl upholstery,
glass, vinyl tops, fiberglass, wood and many other surfaces. It virtually
eliminates the need to seal graffiti marks before finishing or spray
painting. The aerosol system reduces application cost by saving time
and material |
 |
|
| PB150 |
General Purpose Adhesive |
Premier Bond PB150 is an industrial strength contact adhesive for a wide range of applications. The PB150 adhesive is water resistant and provides a medium application temperature range. It has been specifically designed for the HVAC Insulation industries. PB150 may be used on a variety of substrates; ABS surrounds, fabrics, upholstery, foam, felt, cardboard, glass, cork, metal, fiberglass and plastics. The aerosol system reduces application cost by saving time. |
 |
|
| PB900 |
Haps Free Adhesive |
PB900 is a HAPS FREE, MACT compliant contact adhesive.
PB900 is water resistant and temperature resistant to above 200 degrees
F. PB900 is designed for bonding a variety of substrates including
high pressure laminates, veneer, fabrics, upholstery, foam, headliners,
fiberglass |
|
|
| PB902 |
Adhesive Remover |
PB902 was developed to remove adhesive
overspray. The product efficiently removes adhesive from a wide variety
of surfaces such as laminates, plastic, and metals. PB902 also works
well to remove laminated materials surfaces that may have been improperly
installed or damaged during installation. |
|
|
| PB910 |
Low Voc, CA Compliant
High Performance, High Strength
Postformable |
GreenGuard Certified Premier PB910 is a versatile, high performance industrial contact adhesive. The PB910 adhesives are water resistant and temperature resistant to above 200° F. PB910 is designed for bonding decorative laminates to particleboard but may also be used on a variety of other substrates including veneers, fabrics, upholstery, foam, headliners, glass and mirrors, cork, tile, fiberglass and plastics. The aerosol system reduces application cost by saving time and material. |
|
|
| PB912 |
Low VOC
Contact Adhesive For HPL and Automotive |
Excellent applications for High Pressure Laminate (HPS), and automotive, marine or aeronautical interiors, including headliners, vinyl trim, dash coverings, door coverings, floor coverings, panel coverings, upholstery and automotive top and trim. It has been especially developed to meet reduced VOC and high coverage requirements. PB912 has high strength, high heat resistant bond that is resistant to water and many household chemicals. The aerosol system reduces application cost by saving time and material. |
|
|
| PB918 |
Non-Chlorinated Pressure Sensitive
Adhesive |
PB918 General Purpose Spray Adhesive
is a pressure sensitive aerosol adhesive with exceptional characteristics.
Its tack and high shear strength makes PB918 General Purpose Adhesive
an excellent choice for most permanent adhesive applications. The
aerosol package offers a specially designed web spray pattern for
even, controlled distribution of the adhesive. |
|
|
| PB922 |
Flammable Solvent |
PB922 Flammable Solvent is recommended
for removing cement smears from work pieces and hands, as well as
cleaning brushes, rollers, spray lines and parts of equipment which
cannot be reached for wiping. |
|
|
| PB923 |
High Temp Non-Chlorinated Adhesive |
PB923 Adhesive is a contact aerosol
adhesive with exceptional characteristics. Its tack and high shear
strength makes PB923 Contact Adhesive an excellent choice for most
permanent adhesive applications. The aerosol package offers a specially
designed web spray pattern for even, controlled distribution of the
adhesive. |
|
|
| PB924 |
Pressure Sensitive Adhesive |
PB924 Adhesive is a pressure sensitive
adhesive with exceptional characteristics. Its tack and high shear
strength and open time makes PB924 an excellent choice for most permanent
adhesive applications. The aerosol package offers a specially designed
web spray pattern for even, controlled distribution of the adhesive. |
|
|
| PB924N |
Non-Flammable Pressure Sensitive Adhesive |
PB924N Adhesive is a pressure sensitive
adhesive with exceptional characteristics. Its tack and high shear
strength and open time makes PB924N an excellent choice for most permanent
adhesive applications. The aerosol package offers a specially designed
web spray pattern for even, controlled distribution of the adhesive. |
|
|
| PB925 |
Contact Adhesive |
PB925 Adhesive is a clear contact
adhesive with exceptional characteristics. Its tack and high shear
strength makes PB925 Contact Adhesive an excellent choice for most
permanent adhesive applications. The aerosol package offers a specially
designed web spray pattern for even, controlled distribution of the
adhesive. |
|
|
| PB925N |
Non-Flammable Contact Adhesive |
PB925N is a non-flammable aerosol contact spray
adhesive. Its ease and control of application, combined with excellent
bonding characteristics, makes PB925N an outstanding choice for many
permanent laminating applications. |
|
|
| PB926 |
General Purpose Flammable Adhesive |
Premier PB926 is an industrial strength contact adhesive for a wide range of applications. The PB926 adhesive is water resistant and temperature resistant to above 150°F. PB926 may be used on a variety of substrates; insulation, fabrics, upholstery, foam, felt, cardboard, glass, cork, fiberglass and plastics. The aerosol system reduces application cost by saving time and material. |
|
|
| PB927N |
High Temperature, High Strength, Non-Flammable |
Premier PB927N is a versatile, high performance fast tack industrial contact adhesive that is non-flammable. The PB927N is water resistant and temperature resistant to above 200 ° F. It has no ODS, Ozone Depleting Substances. PB927N is designed for bonding decorative laminates to particleboard and may also be used on a variety of other substrates including veneers, fabrics, upholstery, foam, headliners, glass and mirrors, cork, tile, fiberglass and plastics, particleboard, sheet aluminum and most metals. The aerosol system reduces application cost by saving time and material. PB927N is cost effective with a high coverage rate. |
|
|
| PB928 |
High Temp
Non-Chlorinated Contact Adhesive |
PB928 has no chlorinated solvents
and offers an excellent option to methylene chloride based products.
The outstanding bond strength and exceptional tack makes PB928 the
ideal choice for most permanent bonds. |
|
|
| PB929 |
Non-Chlorinated Pressure Sensitive
Adhesive |
PB929 is our Multi-Purpose Pressure
Sensitive adhesive with exceptional characteristics. Its tack and
high shear strength makes PB929 an excellent choice for most permanent
or temporary adhesive applications. The aerosol package offers a specially
designed web spray pattern for even, controlled distribution of the
adhesive. |
|
|
| PB936N |
High Temp, High Strength |
Premier PB936N is a versatile, high performance non-flammable industrial contact adhesive. The PB936N is water resistant and temperature resistant to above 200 ° F. PB936N contains no ODS, Ozone Depleting Substances, and is designed for bonding decorative laminates to particleboard and may also be used on a variety of other substrates including veneers, fabrics, upholstery, foam, headliners, glass and mirrors, cork, tile, fiberglass and plastics. The aerosol system reduces application cost by saving time and material |
|
|
| PB937N |
High Temp, High Strength |
Premier PB937N is a versatile, high performance fast tack industrial contact adhesive that is non-flammable. The PB937N is water resistant and temperature resistant to above 200 ° F. It has no ODS, Ozone Depleting Substances. PB937N is designed for bonding decorative laminates to particleboard and may also be used on a variety of other substrates including veneers, fabrics, upholstery, foam, headliners, glass and mirrors, cork, tile, fiberglass and plastics, particleboard, sheet aluminum and most metals. The aerosol system reduces application cost by saving time and material. PB937N is cost effective with a high coverage rate. |
|
|
| PB939 |
High Temp, High Strength, Non-Flammable |
PB939 is a versatile, high performance
industrial contact adhesive. The PB939 adhesives are water resistant
and temperature resistant to above 200 0F. PB939 is designed for bonding
decorative laminates to particleboard but may also be used on a variety
of other substrates including veneers, fabrics, upholstery, foam,
headliners, glass and mirrors, cork, tile, fiberglass and plastics.
The aerosol system reduces application cost by saving time and material. |
|
|
| PB960 |
High Strength Polystyrene Adhesive |
PB960 is a polymer adhesive formulated specifically
for bonding expanded polystyrene foam materials. PB960 is designed
to be applied directly onto a polystyrene foam surface and, because
of the liquefaction of the adhesive, it imbeds itself within the beads
of the expanded polystyrene foam surface. PB960 offers high tack and
excellent adhesion while providing water resistance. PB960 will not
harm the polystyrene surface. |
|
|
| PB999 |
General Purpose Fast Dry Adhesive |
Premier PB999 is an industrial strength adhesive for use on a wide range of applications, specifically for the Manufacturing Housing, RV and Marine Industries. The adhesive is water resistant and temperature resistant to above 150°F. PB999 can be used on a variety of substrates: ABS tub surrounds, fabrics, upholstery, foam, felt, cardboard, glass, cork, fiberglass and plastics, particleboard, aluminum, duct liner and most metals. PB999 has no chlorinated solvents and no ODS, Ozone Depleting Substances. |
|
|
| PB1000 |
Carpet Adhesive |
PB1000 is a versatile, high performance water
based industrial contact adhesive especially formulated for the carpet
industry. It is a water based latex adhesive that is designed for
smooth backed,jutted backed and action backed carpets. The aerosol
system reduces application cost by saving time and material. |
|
|
| PB1050 |
Carpet Adhesive |
Premier PB1050 is a water-based, high solids, fast tacking pressure sensitive adhesive for bonding lightweight materials like fiberglass insulation, felt, paper and other materials to metal and many other surfaces. PB1050 has been formulated to exceed the requirements of ASTM Standard D3019 and contains no VOCs and no chlorinated solvents. PB1050 is designed to be applied to the surface to be covered with underlayment. |
|
|
| PB2007 |
High Temperature, High Strength, Water Based Adhesive |
Premier PB2007 is designed to be applied to the two surfaces about to be joined. Spray an even coating of adhesive to cover the surfaces. Allow to dry completely and become tacky. Typical dry times are 15-30 minutes, which can be speeded up with hot air, infrared or forced air heaters. Dry completely before bonding parts together. For porous surfaces and crucial areas such as edgebanding, applying a second coat after the first has become tacky is recommended. Place the coated surfaces together and apply a uniform pressure for strongest bonding. Full adhesive strength will be reached in 24 hours. Adhesives and substrates should be at 60 ° F or higher for best results. Insure that surfaces are dry and free from dirt, grease, oils and any other solvents. |
|
|
| PB2008 |
High Temperature, High Strength, Water Based Adhesive |
PB2008 Canister is a versatile, high performance, non-flammable industrial contact adhesive. It is GREENGUARD Certified, LEEDS Compliant industrial contact adhesive. It contains no chlorinated solvents or ODS (Ozone Depleting Substances). The 2008 is water resistant and forms strong permanent bonds and is designed for bonding decorative laminates to particleboard but may also be used on a variety of other substrates including veneers, foam, headliners, glass and mirrors, cork, tile, fiberglass and plastics. |
|
|
| PBQDA |
Quick Dry Adhesive |
Premier QDA (Quick Dry Adhesive) is non-chlorinated, high tack, high solids, fast drying multipurpose adhesive. It is suitable for industrial applications to bond a variety of substrates including fabrics, upholstery, foam, fiberboard, particle board, plywood and many others. The bulk aerosol system reduces application cost by saving time and materials. |
|
|
| PBSAFE |
Adhesive Cleaner Remover |
PBSafe Adhesive Cleaner Remover is an environmentally
safe and biodegradable cleaner which will cut through and remove adhesive
products. This product is 100% organic, made from soybean oil base
and does not contain any petroleum, chlorinated solvents, terpenes
or citrus oil. It is totally non-flammable with no ozone depleting
substances.
PBSafe Adhesive Cleaner Remover can also be used as a degreaser in
a variety of industrial machineries, equipment parts and accessories.
It has many uses in household and construction industries for cleaning
up gears and tools. It removes the most stubborn soil, dries residue
free and leaves no oily film. There is no need to rinse with water
after application, just wipe thoroughly with clean cloth or fabric
material. |
|
|
| SuperStick HAPS FREE |
SuperStick HAPS FREE General Purpose Adhesive |
SuperStick HF is designed for bonding a variety of substrates including fabrics, upholstery, foam, fiberglass insulation and lightweight plastics. It has fast tack is water resistant with no Ozone Depleting Substances or chlorinated solvents. |
|
|
| Undercoating |
Black Rubberized Undercoating |
Asphalt Rubberized UNDERCOATING is a multi-purpose asphalt based rubberized coating that provides protection against rusting in car underbody, door skins, frame rails and fenders. It is designed to protect metal from corrosion and abrasion and can also be used as a sound deadener. The aerosol system reduces application cost by saving time and money. |
|
|
