| SKU |
Name |
Description |
Product
Info Sheet |
MSDS Sheet |
| ACR Canister |
Citrus Adhesive Remover |
StarStuk ACR is a biodegradable, citrus solvent
cleaner, degreaser and adhesive remover. It can be used safely on
most surfaces and substrates, including painted surfaces, glass, porcelain,
concrete, and is compatible with many plastics and vinyls. |
 |
|
| ACR Aerosol |
Citrus Adhesive Remover |
StarStuk ACR is a biodegradable, citrus
solvent cleaner, degreaser and adhesive remover. It can be used safely
on most surfaces and substrates, including painted surfaces, glass,
porcelain, concrete, and is compatible with many plastics and vinyls. |
 |
|
| ACR Bulk |
Adhesive Remover |
NorthStar’s Adhesive Remover
will cut through and remove StarStuk adhesive products. This cleaner
works well on over spray, squeeze out and for equipment cleanup. Adhesive
Remover is specifically formulated to work well on ABS products such
as tub surrounds without attacking or degrading the surface. |
|
|
| AR Aerosol |
Flammable Solvent |
Recommended for removing cement smears from work pieces and hands as well as cleaning equipment, brushes, rollers and spray lines. |
|
|
| AR Canister |
Flammable Solvent |
Recommended for removing cement smears from work pieces and hands as well as cleaning equipment, brushes, rollers and spray lines. |
|
|
| BSAFE |
Adhesive Cleaner Remover |
Bio-Safe Adhesive Cleaner Remover is an environmentally
safe and biodegradable cleaner which will cut through and remove adhesive
products. This product is 100% organic, made from soybean oil base
and does not contain any petroleum, chlorinated solvents, terpenes
or citrus oil. It is totally non-flammable with no ozone depleting
substances. Bio-Safe Adhesive Cleaner Remover can also be used as
a degreaser in a variety of industrial machineries, equipment parts
and accessories. It has many uses in household and construction industries
for cleaning up gears and tools. It removes the most stubborn soil,
dries residue free and leaves no oily film. There is no need to rinse
with water after application, just wipe thoroughly with clean cloth
or fabric material. |
|
|
| BSafe Bulk |
Adhesive Cleaner Remover |
Bio-Safe Adhesive Cleaner Remover is an environmentally
safe and biodegradable cleaner which will cut through and remove adhesive
products. This product is 100% organic, made from soybean oil base
and does not contain any petroleum, chlorinated solvents, terpenes
or citrus oil. It is totally non-flammable with no ozone depleting
substances. Bio-Safe Adhesive Cleaner Remover can also be used as
a degreaser in a variety of industrial machineries, equipment parts
and accessories. It has many uses in household and construction industries
for cleaning up gears and tools. It removes the most stubborn soil,
dries residue free and leaves no oily film. There is no need to rinse
with water after application, just wipe thoroughly with clean cloth
or fabric material. |
|
|
| GM |
General Purpose Flammable Adhesive |
StarStuk GM is an industrial strength contact
adhesive for a wide range of applications. The GM adhesive is water
resistant and temperature resistant to above 150°F. GM may be
used on a variety of substrates; insulation, fabrics, upholstery,
foam, felt, cardboard, glass, cork, fiberglass and plastics. The aerosol
system reduces application cost by saving time and material. |
|
|
| GM Aerosol |
General Purpose, Non-Flammable
Adhesive |
StarStuk GM aerosol is an industrial strength contact adhesive for a wide range of applications. The GM adhesive is water resistant and temperature resistant to above 150°F. GMmay be used on a variety of substrates; insulation, fabrics, upholstery, foam, felt, cardboard, glass, cork, fiberglass and plastics. The aerosol system reduces application cost by saving time and material. |
|
|
| GNP Aerosol |
Non-Chlorinated Pressure Sensitive Adhesive Canister/Aerosol |
GNP canister is our Multi-Purpose Pressure Sensitive adhesive with exceptional characteristics. Its tack and high shear strength makes GNP an excellent choice for most permanent or temporary adhesive applications. The aerosol package offers a specially designed web spray pattern for even, controlled distribution of the adhesive. |
|
|
| GNP Canister |
Non-Chlorinated Pressure Sensitive Adhesive Canister/Aerosol |
GNP canister is our Multi-Purpose Pressure Sensitive adhesive with exceptional characteristics. Its tack and high shear strength makes GNP an excellent choice for most permanent or temporary adhesive applications. The aerosol package offers a specially designed web spray pattern for even, controlled distribution of the adhesive. |
|
|
| GP |
General Purpose Adhesive |
StarStuk GP is an industrial strength contact
adhesive for a wide range of applications. The GP adhesive is water
resistant and temperature resistant to above 150°F. GP may be
used on a variety of substrates; fabrics, upholstery, foam, felt,
cardboard, glass, cork, fiberglass and plastics. The aerosol system
reduces application cost by saving time and material. |
|
|
| Graffiti Off |
Adhesive Cleaner Remover |
GRAFFITI OFF is a product strong enough to remove
most types of graffiti yet safe to use on stone, concrete, brick,
metals,laminated counter tops, vinyl siding, solid vinyl upholstery,
glass, vinyl tops, fiberglass, wood and many other surfaces. It virtually
eliminates the need to seal graffiti marks before finishing or spray
painting. The aerosol system reduces application cost by saving time
and material. |
|
|
| HCA |
High Temperature, High Strength |
StarStuk HCA is a versatile, high performance
industrial strength contact adhesive. The adhesive is water resistant and temperature
resistant to above 200°F. HCA is designed for bonding decorative
laminates to particle board but may also be used on a variety of other
substrates: veneers, fabrics, upholstery, foam, head-liners, glass,
cork, fiberglass and plastics. The aerosol cans reduce application
cost by saving time and material. |
|
|
| HF |
Haps Free Adhesive |
StarStuk HF is a versatile, high performance industrial
contact adhesive. The HF adhesives are water resistant and temperature resistant to above 200 ° F. HF is designed for
bonding decorative laminates to particleboard but may also be used
on a variety of other substrates including veneers, fabrics, upholstery,
foam, headliners, glass and mirrors, cork, tile, fiberglass and plastics.
The aerosol system reduces application cost by saving time and material. |
|
|
| HF Bulk |
Haps Free Adhesive |
StarStuk HF is a versatile, high performance industrial
contact adhesive. The HF adhesives are water resistant and temperature resistant to above 200 ° F. HF is designed for
bonding decorative laminates to particleboard but may also be used
on a variety of other substrates including veneers, fabrics, upholstery,
foam, headliners, glass and mirrors, cork, tile, fiberglass and plastics.
The aerosol system reduces application cost by saving time and material. |
|
|
| HG |
High Temperature, High Strength Adhesive |
StarStuk HG is a versatile, high performance industrial
contact adhesive. The HG adhesives are water resistant and temperature resistant to above 200 ° F. HG is designed for
bonding decorative laminates to particleboard but may also be used
on a variety of other substrates including veneers, fabrics, upholstery,
foam, headliners, glass and mirrors, cork, tile, fiberglass and plastics.
The aerosol system reduces application cost by saving time and material. |
|
|
| HGS |
High Temperature, High Strength Non-Flammable
Adhesive |
StarStuk HGS is a versatile, high performance
industrial contact adhesive that is non-flammable*. The HGS is water resistant and temperature resistant to above 200 ° F. HGS
is designed for bonding decorative laminates to particleboard but
may also be used on a variety of other substrates including veneers,
fabrics, upholstery, foam, headliners, glass and mirrors, cork, tile,
fiberglass and plastics. The aerosol system reduces application cost
by saving time and material. |
|
|
| HL+ |
Low Voc, CA Compliant
High Performance,
High Strength
Postformable |
GreenGuard Certified StarStuk HL+ is a versatile, high performance
industrial contact adhesive. The HL+ adhesives are water resistant
and temperature resistant to above 200° F. HL+ is designed for
bonding decorative laminates to particleboard but may also be used
on a variety of other substrates including veneers, fabrics, upholstery,
foam, headliners, glass and mirrors, cork, tile, fiberglass and plastics.
The aerosol system reduces application cost by saving time and material. |
|
|
| HL+ Bulk |
Low Voc, CA Compliant
High Performance,
High Strength
Postformable |
GreenGuard Certified HL+ Bulk is a versatile, high performance industrial contact adhesive. CA compliant with low VOC’s and LEEDS Compliant. This high temperature adhesive is design for bonding decorative laminates to particleboard but can be used where ever a strong, high temperature environmentally friendly adhesive is needed. |
|
|
| HM Aerosol |
High Temperature, High Strength Flammable
Adhesive |
StarStuk HM is a versatile, high performance industrial
contact adhesive. The HM adhesives are water resistant and temperature
resistant to above 200°F. HM is designed for bonding decorative
laminates to particleboard but may also be used on a variety of other
substrates including veneers, fabrics, upholstery, foam, headliners,
glass and mirrors, cork, tile, fiberglass and plastics. The aerosol
system reduces application cost by saving time and material. |
|
|
| HM Bulk |
High Temperature, High Strength, Non-Flammable Adhesive |
HM Bulk is a Non-Flammable, High Solids Spray Grade adhesive. HM is great for bonding a wide variety of materials, including, but not limited to, decorative laminates, metals (except copper), plywood, particleboard, polyurethane foam and rigid plastics. The consistency of HM provides easy and uniform coverage, by spray, in all types and sizes of operations. With good green strength, it provides uniform high strength bonds under a wide variety of laminating conditions. |
|
|
HM Canister |
High Temperature, High Strength Flammable
Adhesive |
StarStuk HM is a versatile, high performance industrial
contact adhesive. The HM adhesives are water resistant and temperature
resistant to above 200°F. HM is designed for bonding decorative
laminates to particleboard but may also be used on a variety of other
substrates including veneers, fabrics, upholstery, foam, headliners,
glass and mirrors, cork, tile, fiberglass and plastics. The aerosol
system reduces application cost by saving time and material. |
|
|
| HMS |
High Temperature, High Strength True Non-Flammable
Adhesive |
StarStuk HMS is a versatile, high performance
industrial contact adhesive that is non-flammable per flame projection
test. The HMS is water resistant and temperature resistant to above
200°F. HMS is designed for bonding decorative laminates to particleboard
but may also be used on a variety of other substrates including veneers,
fabrics, upholstery, foam, headliners, glass and mirrors, cork, tile,
fiberglass and plastics. The aerosol system reduces application cost
by saving time and material. |
|
|
| HPS Bulk |
High Temperature, High Strength Adhesive |
StarStuk HPS is a versatile, high performance industrial
contact adhesive. The HPS adhesives are water resistant and temperature
resistant to above 200°F. HPS is designed for bonding decorative
laminates to particleboard but may also be used on a variety of other
substrates including veneers, fabrics, upholstery, foam, headliners,
glass and mirrors, cork, tile, fiberglass and plastics. The aerosol
system reduces application cost by saving time and material. |
|
|
| HPS Canister |
High Temperature, High Strength Adhesive |
StarStuk HPS is a versatile, high performance industrial
contact adhesive. The HPS adhesives are water resistant and temperature
resistant to above 200°F. HPS is designed for bonding decorative
laminates to particleboard but may also be used on a variety of other
substrates including veneers, fabrics, upholstery, foam, headliners,
glass and mirrors, cork, tile, fiberglass and plastics. The aerosol
system reduces application cost by saving time and material. |
|
|
| HSN Aerosol |
High Temperature, High Strength, Non-Flammable,
Non-MC Adhesive |
StarStuk HSN is a versatile, high
performance industrial contact adhesive. The HSN adhesives are water
resistant and temperature resistant to above 200 0F. HSN is designed
for bonding decorative laminates to particleboard but may also be
used on a variety of other substrates including veneers, fabrics,
upholstery, foam, headliners, glass and mirrors, cork, tile, fiberglass
and plastics. The aerosol system reduces application cost by saving
time and material. |
|
|
| HSN Bulk |
Contact Adhesive |
StarStuk HSN Bulk Contact Adhesive is a versatile, high performance industrial contact adhesive. The HSN adhesives are water resistant and temperature resistant to above 200 ° F. It has a quick tack, is flexible, non-wrinkling and water proof. HSN is designed for bonding decorative laminates to particleboard but may also be used on a variety of other substrates including veneers, fabrics, upholstery, foam, headliners, glass and mirrors, cork, tile, fiberglass and plastics. The aerosol system reduces application cost by saving time and material. |
|
|
HSN Canister |
High Temperature, High Strength, Flammable,
Non-MC Adhesive |
StarStuk HSN is a versatile, high
performance industrial contact adhesive. The HSN adhesives are water
resistant and temperature resistant to above 200°F. HSN is designed
for bonding decorative laminates to particleboard but may also be
used on a variety of other substrates including veneers, fabrics,
upholstery, foam, headliners, glass and mirrors, cork, tile, fiberglass
and plastics. The aerosol system reduces application cost by saving
time and material. |
|
|
| HT |
High Temperature, High Strength Adhesive
System |
StarStuk HT is a versatile, high performance
industrial contact adhesive. The HT adhesives are water resistant
and temperature resistant to above 200°F. HT is designed for bonding
decorative laminates to particleboard but may also be used on a variety
of other substrates including veneers, fabrics, upholstery, foam,
headliners, glass and mirrors, cork, tile, fiberglass and plastics.
The aerosol system reduces application cost by saving time and material. |
|
|
| NS22 |
Flammable Solvent |
StarStuk NS22 Flammable Solvent will cut through
and remove StarStuk adhesive products. This cleaner works well on over spray, squeeze
out and for equipment cleanup |
|
|
| NS22 Bulk |
Flammable Solvent |
StarStuk NS22 Flammable Solvent will cut through
and remove StarStuk
adhesive products. This cleaner works well on over spray, squeeze
out and for equipment cleanup |
|
|
| NS35 Bulk |
Neoprene Contact Adhesive |
StarStuk NS35 is a brush-grade neoprene rubber
adhesive that forms permanent bonds on a variety of surfaces. This
professional quality adhesive offers instant adhesion to eliminate
the need for clamps or temporary fasteners. Used extensively to bond
high-pressure laminates for counter tops, tabletops, and cabinets,
Forms a durable, super-strong bond when parts are assembled and momentary
pressure is applied. Meets performance requirements of Federal Specification
MMM-A-130B. Meets all CPSC requirements. |
|
|
| NS38 Bulk |
Post Form Contact Adhesive |
NS38 offers a number of benefits like high solids, contact adhesive that will increase productivity and allow faster line speeds on laminating lines. NS38 is a high performance adhesive featuring high heat resistance, high solids and extremely fast drying with low odor, and qualifies for a Class A Flame Spread rating when tested in accordance with ASTM-E81 tunnel test. |
|
|
| NS40 Bulk |
Post Form Contact Adhesive |
StarStuk NS40 offers a number of benefits like
high solids, contact adhesive that will increase productivity and
allow faster line speeds on laminating lines. NS40 is a high performance
adhesive featuring high heat resistance, high solids and extremely
fast drying with low odor, and qualifies for a Class A Flame Spread
rating when tested in accordance with ASTM-E81 tunnel test. |
|
|
| NS41 Bulk |
High Temperature, Postformable Brush Grade Adhesive |
StarStuk NS41 Hi-Temp Brush Grade has been specifically formulated for industrial use in bonding a wide variety of materials, including, but not limited to, decorative laminates, metals (except copper), plywood, particleboard, polyurethane foam and rigid plastics. NS41 provides easy and uniform coverage in all types and sizes of industrial operation. It is especially good for use where climatic conditions or ambient temperatures present bonding difficulties. Its high heat resistance coupled with its high ultimate strength gives it the versatility for use ranging from general laminating to post forming operation. |
|
|
| NS50 |
High Temp Brush Grade Contact Adhesive |
StarStuk NS50 Hi-Temp Brush Grade has been specifically
formulated for industrial use in bonding a wide variety of materials,
including, but not limited to, decorative laminates, metals (except
copper), plywood, particleboard, polyurethane foam and rigid plastics.
NS50 provides easy and uniform coverage in all types and sizes of
industrial operation. It is especially good for use where climatic
conditions or ambient temperatures present bonding difficulties. Its
high heat resistance coupled with its high ultimate strength gives
it the versatility for use ranging from general laminating to post
forming operation. |
|
|
| NS55 |
Premium Brush Grade Contact Adhesive |
StarStuk NS55 Premium brush Grade
adhesive has been specifically formulated for applications where flammability
is an issue. A non-flammable product, NS55 is great for bonding a
wide variety of materials, including, but not limited to, decorative
laminates, metals (except copper), plywood, particleboard, polyurethane
foam and rigid plastics. The consistency of NS55 provides easy and
uniform coverage, by brush or roller, in all types and sizes of operations.
Its high tack plus excellent combinability and green strength provides
uniform high strength bonds under a wide variety of laminating conditions. |
|
|
| NS70 Bulk |
Non-Flammable, High Heat Spray Grade
Contact Adhesive |
StarStuk NS70 High Heat Resistance
Spray Grade has been specifically formulated for use in bonding a
wide variety of materials, including, but not limited to, decorative
laminates, metals (not copper), plywood, particleboard, foamed polystyrene
(using dry spray technique), polyurethane foam and rigid plastics.
The consistency of NS70 provides easy and uniform coverage, by spray
in all types and sizes of operations. Its high tack plus excellent
combinability and green strength provides uniform high strength bonds
under a wide variety of laminating conditions. |
|
|
| NS72 |
High Quality White Wood Glue |
A super high-strength, aliphatic resin,
water-base white wood glue for woodworking and other uses great for:
Furniture Cabinetmaking General woodworking repairs |
|
|
| NS74 |
High Quality Yellow Wood Glue |
A super high-strength, aliphatic resin,
water-base yellow wood glue for woodworking and other uses great for:
Furniture Cabinetmaking General woodworking repairs |
|
|
| NS75 |
High Solids Spray Grade Contact Adhesive |
StarStuk NS75 High Solids Spray Grade
has been specifically formulated for use in areas where flammability
is an issue. A non-flammable product, NS75 is great for bonding a
wide variety of materials, including, but not limited to, decorative
laminates, metals (except copper), plywood, particleboard, polyurethane
foam and rigid plastics. The consistency of NS75 provides easy and
uniform coverage, by spray, in all types and sizes of operations.
With good green strength, it provides uniform high strength bonds
under a wide variety of laminating conditions. |
|
|
| NS912 Bulk |
Low VOC
Bulk Adhesive For HPL and Automotive |
Excellent applications for High Pressure Laminate (HPS), and automotive, marine or aeronautical interiors, including headliners, vinyl trim, dash coverings, door coverings, floor coverings, panel coverings, upholstery and automotive top and trim. It has been especially developed to meet reduced VOC and high coverage requirements. NS912 has high strength, high heat resistant bond that is resistant to water and many household chemicals. The aerosol system reduces application cost by saving time and material |
|
|
| NS912 Canister |
Low VOC
Contact Adhesive For HPL and Automotive |
Excellent applications for High Pressure Laminate (HPS), and automotive, marine or aeronautical interiors, including headliners, vinyl trim, dash coverings, door coverings, floor coverings, panel coverings, upholstery and automotive top and trim. It has been especially developed to meet reduced VOC and high coverage requirements. NS912 has high strength, high heat resistant bond that is resistant to water and many household chemicals. The aerosol system reduces application cost by saving time and material |
|
|
Postforming Adhesive
with Neoprene |
High Temperature High Strength Postforming Adhesive |
Postforming Adhesive with Neoprene is a versatile, high performance industrial contact adhesive. It is water resistant and temperature resistant to above 200 ° F. It is designed for bonding decorative laminates to particleboard but may also be used on a variety of other substrates including veneers, fabrics, upholstery, foam, headliners, glass and mirrors, cork, tile, fiberglass and plastics. The aerosol system reduces application cost by saving time and material. |
|
|
| QDA |
Quick Dry Adhesive |
StarStuk QDA (Quick Dry Adhesive) is non-chlorinated, high tack, high solids, fast drying multipurpose adhesive. It is suitable for industrial applications to bond a variety of substrates including fabrics, upholstery, foam, fiberboard, particle board, plywood and many others. The bulk aerosol system reduces application cost by saving time and materials. |
|
|
| SG Aerosol |
Expanded Polystyrene Adhesive |
StarStuk SG adhesive is formulated specifically for bonding expanded polystyrene foam materials. It can be applied directly onto a polystyrene foam surface offering a high tack film. SG has excellent adhesion and excellent water resistance. This product has an adjustable tip offering the user a variable webbing pattern. SG is not recommended for unsupported vinyl. |
|
|
| SG Canister |
Expanded Polystyrene Adhesive |
StarStuk SG is a versatile, high performance
industrial contact adhesive. The SG adhesive is water resistant and
designed specifically for bonding expanded polystyrene. It may also
be used on a variety of other substrates including fabrics, upholstery,
foam, cork, and some plastics. The aerosol system reduces application
cost by saving time and material. |
|
|
| SuperStick HF |
Super Stick is a HAPS Free water resistant general purpose adhesive. |
Super Stick HAPS Free is designed for bonding a variety of substrates including fabrics, upholstery, foam, fiberglass insulation, lightweight plastics. It is water resistant with fast tack. Contains no ODS (Ozone Depleting Substances) or chlorinated solvents. |
|
|
| T250 Aerosol |
Infusion Molding Adhesive |
T250 Infusion adhesive specifically designed to hold reinforcing fibers in place during infusion process of the
resin without affecting surface finish or structural integrity. Panels were prepared and tested and approved by
ASTM D 790 and an independent industry consultant. |
|
|
| T250 |
Infusion Molding Adhesive |
T250 Infusion adhesive specifically designed to hold reinforcing fibers in place during infusion process of the
resin without affecting surface finish or structural integrity. Panels were prepared and tested and approved by
ASTM D 790 and an independent industry consultant. |
|
|
| TI-50 Bulk |
General Purpose Adhesive |
StarStuk TI-50 is an industrial strength contact adhesive for a wide range of applications. The TI-50 adhesive is water resistant and provides a medium application temperature range. It has been specifically designed for the HVAC Insulation industries. TI-50 may be used on a variety of substrates; ABS surrounds, fabrics, upholstery, foam, felt, cardboard, glass, cork, metal, fiberglass and plastics. The aerosol system reduces application cost by saving time. |
|
|
| TI-50 Canister |
General Purpose Adhesive |
StarStuk TI-50 is an industrial strength contact adhesive for a wide range of applications. The TI-50 adhesive is water resistant and provides a medium application temperature range. It has been specifically designed for the HVAC Insulation industries. TI-50 may be used on a variety of substrates; ABS surrounds, fabrics, upholstery, foam, felt, cardboard, glass, cork, metal, fiberglass and plastics. The aerosol system reduces application cost by saving time. |
|
|
| Undercoating Canister |
Asphalt Rubberized Undercoating |
Asphalt Rubberized UNDERCOATING is a multi-purpose asphalt based rubberized coating that provides protection against rusting in car underbody, door skins, frame rails and fenders. It is designed to protect metal from corrosion and abrasion and can also be used as a sound deadener. The aerosol system reduces application cost by saving time and money. |
|
|
| VT-32 |
Quick Tack Adhesive |
StarStuk VT-32 is an industrial strength spray adhesive used for a wide range of applications for the Manufactured Housing, RV and Marine Industries. VT-32 adhesive is a water resistant with a quick, aggressive tack. StarStuk VT-32 may be used on a variety of substrates including: insulation, fabrics, foam, felt, cardboard and some plastics. The bulk aerosol system reduces cost by saving time and material. |
|
|
| W2007 |
High Temperature, High Strength Water Based Adhesive |
StarStuk W2007 is designed to be applied to the
two surfaces about to be joined. Spray an even coating of adhesive
to cover the surfaces. Allow to dry completely and become tacky. Typical
dry times are 15-30 minutes, which can be speeded up with hot air,
infrared or forced air heaters. Dry completely before bonding parts
together. For porous surfaces and crucial areas such as edgebanding,
applying a second coat after the first has become tacky is recommended.
Place the coated surfaces together and apply a uniform pressure for
strongest bonding. Full adhesive strength will be reached in 24 hours.
Adhesives and substrates should be at 60 ° F or higher for best
results. Insure that surfaces are dry and free from dirt, grease,
oils and any other solvents. |
|
|
| W2007 Bulk |
High Temperature, High Strength, Water Based Adhesive |
StarStuk W2007 is designed to be applied to the two surfaces about to be joined. Apply an even coating of adhesive to cover the surfaces. Allow to dry completely and become tacky. Typical dry times are 15-30 minutes, which can be speeded up with hot air, infrared or forced air heaters. Dry completely before bonding parts together. For porous surfaces and crucial areas such as edgebanding, applying a second coat after the first has become tacky is recommended. Place the coated surfaces together and apply a uniform pressure for strongest bonding. Full adhesive strength will be reached in 24 hours. Adhesives and substrates should be at 60 ° F or higher for best results. Insure that surfaces are dry and free from dirt, grease, oils and any other solvents. |
|
|
| W2008 Canister |
High Temperature, High Strength, Water Based Adhesive |
W2008 Canister is a versatile, high performance, non-flammable industrial contact adhesive. It is GREENGUARD Certified, LEEDS Compliant industrial contact adhesive. It contains no chlorinated solvents or ODS (Ozone Depleting Substances). The 2008 is water resistant and forms strong permanent bonds and is designed for bonding decorative laminates to particleboard but may also be used on a variety of other substrates including veneers, foam, headliners, glass and mirrors, cork, tile, fiberglass and plastics.
|
|
|
| W2008 Bulk |
High Temperature, High Strength, Water Based Adhesive |
W2008 Bulk is a versatile, high performance, non-flammable industrial contact adhesive. It is GREENGUARD Certified, LEEDS Compliant industrial contact adhesive. It contains no chlorinated solvents or ODS (Ozone Depleting Substances). The 2008 is water resistant and forms strong permanent bonds and is designed for bonding decorative laminates to particleboard but may also be used on a variety of other substrates including veneers, foam, headliners, glass and mirrors, cork, tile, fiberglass and plastics.
|
|
|
| WC1000 Canister |
Carpet Adhesive |
W1000 is a versatile, high performance water based
industrial contact adhesive especially formulated for the carpet industry.
It is a water based latex adhesive that is designed for smooth backed,jutted
backed and action backed carpets. The aerosol system reduces application
cost by saving time and material. |
|
|
| WC1000 Bulk |
Carpet Adhesive |
WC1000 is a versatile, high performance water based industrial contact adhesive especially formulated for the carpet industry. It is a water based latex adhesive that is designed for smooth backed, jutted backed and action backed carpets. The aerosol system reduces application cost by saving time and material. |
|
|
WC1050 Bulk |
Water based, Leed Compliant, GreenGuard Certified carpet adhesive bulk |
StarStuk WC1050 is a water-based, high solids, fast tacking pressure sensitive adhesive for bonding lightweight materials like fiberglass insulation, felt, paper and other materials to metal and many other surfaces. WC1050 has been formulated to exceed the requirements of ASTM Standard D3019 and contains no VOCs and no chlorinated solvents. WC1050 is designed to be applied to the surface to be covered with underlayment. |
|
|
| WC1050 Canister |
Water-based, Leed Compliant, GreenGuard Certified Pressure Sensitive Adhesive |
StarStuk WC1050 is a water-based, high solids, fast tacking pressure sensitive adhesive for bonding lightweight materials like fiberglass insulation, felt, paper and other materials to metal and many other surfaces. WC1050 contains no VOCs and no chlorinated solvents. The aerosol system reduces application cost by saving time and material. To be used with NorthStar spray gun (EG 1020) with tip 730154 onto the cylinder. |
|
|
| W2002 Bulk |
General Purpose Fast Dry Adhesive |
StarStuk 2002 Bulk is an industrial strength adhesive that has been designed for the Manufactured Housing, RV and Marine Industries. The StarStuk 2002 Bulk is water resistant, temperature resistant to above 150 degrees F, with no chlorinated solvents or ODS (ozone depleting substances). StarStuk 2002 Bulk may be used on a variety of substrates: ABS tub surrounds, fabrics, upholstery, foam, felt, cardboard, glass, cork, fiberglass and plastic. |
|
|
| W2002 |
General Purpose Fast Dry Adhesive |
StarStuk 2002 is an industrial strength contact
adhesive for a wide range of applications. It has been specifically
designed for the Manufacturing Housing, RV and Marine industries.
The adhesive is water resistant and temperature resistant to above
150°F. 2002 may be used on a variety of substrates; ABS tub surrounds,
fabrics, upholstery, foam, felt, cardboard, glass, cork, fiberglass
and plastics. The aerosol system reduces application cost by saving
time and material. |
|
|
|
